Axiom Surface Generator

FINISHING EQUIPMENT

SOFTWARE
 
2G Surface Generator

The 2G is a dry-cutting, bench-mounted, 3-axis generator for CR-39, Polycarbonate and Hi-Index lenses.

Full Display Job Entry Screen Allows operator to review all lab ticket data to minimize errors.
Lap Cutting Capabilities Plastic or foam lap tools can be cut for every lens surface in its range. Special software contains information on lap types from various manufacturers and allows the 2G to suggest the best lap for the required center removal.
Dry Cutting Accuracy Exact prescriptions are generated free of elliptical error in a range of +6.00 diopters to -30.00
diopters in lens curves and -6.00 diopters to +30.00 diopters in lap curves.
Statistics Screen A Statistics Screen tracks valuable information about each job including type of cut, average number
of passes, and average cycle time. It also tracks important maintenance records.
Increased Operator Efficiency When interfaced, one operator can easily operate multiple machines.
Automatic Lens Cribbing and Pin Beveling Lenses can be cribbed to an operator-specified diameter, as well as pin beveled. Job Screen includes a selection for turning pin beveling on or off for each lens.
Versatile and Durable CR-39, Poly, Trivex or Hi-Index lenses can be generated interchangeably.
Interfaceable and Compatible

Fully interfaceable with most 3rd-party software packages. OMA Protocol-compatible.

Accepts barcode job entry (barcode optional).

Software Automatically Generates Specified Prism Prism up to 15.0 D without prism marking, blocking or rings.
Additional Features Shipped Complete with vacuum system and accessory kit.

Modular design facilitates in-lab maintenance and repair.

Factory training and technical service support included.

One year parts and labor warranty.
Mechanical

Weight:
Generator -110 lbs/50 Kgs
Vacuum -24 lbs/11 Kgs

Height: 19" (48cm)

Width: 30" (75cm)

Depth: 25" (64 cm)

80 PSI clean, dry compressed air required

Electrical

Input:
115 VAC, 60 Hz,1500 WATTS
230 VAC, 50 Hz,1500 WATTS

20 Amp.service line required

ETL LISTED, Conforms to UL Std. for Electrical Equipment for Laboratory Use ETL TESTING
LABORATORIES, INC.

Ranges

Lens Curve Range: +6.00 Diopters to -30.00 Diopters

Lap Curve Range: -6.00 Diopters to +30.00 Diopters

Cylinder Range: 15.00 Diopters

Prism Range: 15.00 Diopters

Saddleback Range: +6.00 Diopters to -6.00 Diopters

Maximum Blank Size: 90mm (blocked on geometric center)












©2010 National Optronics
All Rights Reserved
Design by Chappell Graphics