2G Surface Generator
3B Blocker
4Ti Tracer
7E Edger
7E HLP Edging System
Dimension Tracer
Horizon II Edger

SURFACING EQUIPMENT

SOFTWARE
 
Horizon II Edger

The Horizon II is a time tested, dry-cutting pattern edger that can edge CR-39, Polycarbonate and Hi-Index lenses.

Speed,Accuracy and Convenience of Dry-Cutting Technology Cuts all shapes, sizes and powers of CR-39, Polycarbonate and Hi-Index lenses without changing
cutters. Carbide blades cut instead of grind, so there is no rounding of the bevel. Standard cycle time
is less than one minute.
Vacuum System Plastic debris is removed by a vacuum system, eliminating the need for coolants.
Optional Cutters As factory equipped, the edger will cut bevel and rimless interchangeably. Optional cutters expand
edge peripheries to a dozen finishes, including Grooving, Faceting, Shelving and Roll & Bevel.
Variable Flow Control Standard cycle time is less than one minute, with a 20 second finish-only cycle for touch-up. Even the largest Poly lenses can be edged in a single cycle with a slower flow control cycle
All Electronic Fully integrated circuitry eliminates microswitch adjustment, ensuring high reliability.
Proven Performance Thousands of installations worldwide have proven the Horizon II to be a workhorse of the industry.
Two Bevel Placement System Two fully-adjustable bevel guide systems are standard: A Teflon Guide Wheel which tracks the actual front curve of the lens or a Cam Tracking System which duplicates nominal base curves. Both
systems provide for fully variable front-to-back placement on all periphery finishes. Each system
features a cycle-pause feature which allows the operator to easily make bevel placement adjustment
mid-cycle.
Pattern Making Pattern from a lens capability, a feature unique to dry edging, is standard.
Brushless Motor Our DC, brushless motor is ultra quiet and more durable than conventional router motors.
Additional Features
  • Air chucking.
  • Shipped complete with vacuum system and accessory kit.
  • Multiple edge finishes with optional cutters.
  • Modular design facilitates in-lab maintenance and repair.
  • Factory training and technical service support included.
  • One year parts and labor warranty.
Mechanical

Weight:
Edger -112 lbs
Vacuum -24 lbs

80 PSI clean, dry compressed air required

Electrical

Input:
115 VAC 60 Hz,1500 WATTS
230 VAC 50 Hz,1500 WATTS

15 Amp. service line required

ETL LISTED, Conforms to UL Std. for Electrical Equipment for Laboratory Use ETL TESTING
LABORATORIES, INC.

Variable Flow Control Standard cycle time is less than one minute, with a 20 second finish-only cycle for touch-up. Even the largest Poly lenses can be edged in a single cycle with a slower flow control cycle.
Ranges

Front Base Curve Range: 0 -12D

Lens Blank: Up to 100mm

Minimum Finished “B ” Size::24mm (with 1/2-eye clamp:19mm)



©2010 National Optronics
All Rights Reserved
Design by Chappell Graphics